Quality Products
Competitive Pricing
Delivered On-Time!
INDUSTRIAL HYDRAULICS REPAIR BLOG
Can Low Nitrogen Pressure Mimic Hydraulic Pump Problems?
A hydraulic system can start acting tired even when the pump can still do its job. Pressure takes longer to recover. A machine hesitates during part of its cycle. The pump seems to run more often than it used to. Maintenance teams start with the obvious suspects, and...
Case Drain Backpressure – How It Can Damage A Rebuilt Hydraulic Motor
A hydraulic motor that has been repaired may be ready for use when it leaves the repair shop, yet still encounter difficulties after installation. In some cases, the problem does not lie within the motor at all; it may be in a small line that receives little attention...
What A Hydraulic Repair Test Report Tells You After A Rebuild
When a repaired hydraulic component comes back to the plant, the first reaction is usually relief. Production needs the machine running again, and the rebuild looks clean, painted, and ready to install. It can be tempting to treat the paperwork in the box as something...
Preparing Hydraulic Pumps, Motors, and Servo Valves for Repair
When a hydraulic component fails, production usually takes priority over paperwork. A spare unit goes in, a temporary solution keeps the line moving, and the failed pump, motor, or servo valve gets placed on a shelf for later attention. By the time it is ready to...
What Is a Hydraulic Pump and How Does It Work?
Hydraulic systems are behind much of the equipment used in today’s industrial operations. They’re popular because they generate a lot of power while still allowing for smooth, controlled movement. Whether lifting heavy loads, running industrial presses, steering...
Cavitation vs. Aeration: How to Identify Hydraulic Pump Problems
Hydraulic problems rarely announce themselves with a single clean symptom. More often, it’s a slow creep: the machine feels weaker, cycle time stretches, oil runs hotter, and operators start “bumping” controls to get the same result. If you’re chasing that kind of...
Hydraulic Systems: Why Predictive Maintenance Matters
Hydraulic systems may not always get much attention, but they quietly power some of the most important machines in modern industry. In many ways, they are the unsung heroes behind dozens of industries including construction, manufacturing, agriculture, transportation,...
How to Spot Internal Leakage in Hydraulic Pumps and Motors
A hydraulic pump or motor can look “fine” right up until it isn’t. Pressure might still build. The machine might still move. Then the cycle time starts creeping up, oil temps climb, and you get that uneasy feeling that something is wearing out faster than it should....
Hydraulic Hose Failure: Top 3 Causes & Prevention Tips
Hydraulic hoses help power heavy machinery by allowing highly pressured fluid to flow through them, creating force that powers heavy equipment such as excavators, skid steers, bulldozers, and beyond. But with great force comes great responsibility – and the potential...
Post-Failure System Recovery – Cleanup After a Pump or Motor Grenades
When a hydraulic pump fails, it is loud, expensive, and it usually stops production on the spot. Hard failures create bits of metal that become a destructive issue in minutes. They mix with the oil, obstruct openings, and can seize a system that was running perfectly...
Call Us Today!
Address
3716 Plaza Drive
Ann Arbor, MI 48108
(734) 996-4996
(800) 824-0808 (toll free)
(734) 668-6630 (fax)
Hours
8:30am-4:30pm
Quick Links
Map & Directions
Follow Us
Servo Kinetics works with clients domestically and internationally. Our Hydraulic Repair Company offers a wide range of services including: hydraulic repair services, pump repair, hydraulic failures, hydraulic flight simulator, hydraulic fluid testing, motor rebuilding repair services, hydraulic motor repair, hydraulic piping, hydraulic problems, pump failure, pump rebuilding, hydraulic pump repair, hydraulic servo motors, servo valve repair, rebuilding hydraulic pumps, vacuum pump repair, Vickers motors, Vickers servo valve, Vickers factory rebuild, Beach Russ vacuum pump repair, EHC energy pump repair, flight simulator repair, and more!
Please contact us today, we are looking forward to speaking with you!